快板环境变量设置.doc

ALLEGRO ENVIRONMENT VARIABLES 快板环境变量设置 _________________________________________________________________________________ 类型: /光标 全屏光标停滞处理: 全屏光标可能在三维显卡加速处理器上会有停滞问题. 设置解决全屏光标停滞问题 pcb_cursor : 设置快板显示的光标类型(默认为十字光标). 全屏光标角度设置: 仅适用于全屏的光标（见pcb_cursor变量）。 默认情况下，显示的是无限的十字正交。这个变量是指定全屏光标的角度(0~90)。 __________________________________________________________________________________ 类型: /提示 快板预选和应用模式选择 自定义数据提示延迟时间:默认情况下,数据提示定制消失250毫秒的光标离开之后的对象数据提示显示。 这是所需的时间用户移动光标到要访问的数据提示先进的功能。 这允许这种延迟是调整之间的0（即时数据提示消失）2000毫秒。 数据提示延迟 : 默认情况下，数据提示出现如果光标停留在250毫秒的相同位置。这允许延迟 要调整100和2000毫秒之间。 数据提示显示位置: 默认位置为下一个光标处. (如果设置了将会在工作面板的底部) 禁用数据提示: 禁用上下文敏感的数据提示，当鼠标悬停在快板的数据元素 disable_hover_over: Disables dynamic highlighting and datatips that occur when you hover over elements in the display. Dynamic highlighting and datatips will still occur for application mode commands because they are needed for preselection preview. focus_followmouse: Controls interaction of window focus and hover-over highlighting and datatips. If not set, highlighting/datatips are enabled only when the Allegro canvas is in focus. If set to allegro_derived, they are also enabled when Allegro sub-windows such as show element are in focus. When set to anywhere, they are enabled regardless of focus. __________________________________________________________________________________ 类型: display/element Show Element Preference Settings etchlen_ignore_pinvia: By default, the etch length that is computed for show element and other commands will include via to via offset distances when a via or pin are direct connected. This makes this calculation agree with our delay calculations. Setting this variable will restore