旋转门的设计论文目录及摘要.docVIP

攀枝花学院本科毕业设计（论文） 三翼自动旋转门设计 学生姓名： 龙 旭 学生学号： 200320623072 院（系）： 机电工程学院 年级专业： 03机制(2)班 指导教师： 乔水明 讲师 二〇〇七年六月 摘 要 三翼自动旋转门作为自动门中的顶级产品，旋转门给人以亲切大方的感觉，同时营造出奢华的气氛，堪称建筑物的点睛之笔。、控制系统、铝和玻璃等组成部分由和齿轮箱减速机构组成，安装在门中心顶部的内多非接触式传感器及开关 ABSTRACT Three wings automatic revolving door is leading products in automatic doors, it can give generously warm and feeling and creating luxurious atmosphere, Meanwhile, it is a eye in modern buildings . This paper mainly discusses the design about gate body system、transmission system、 control system and safely system of the three wings automatic revolving door.It proposed that the door frame is composed of glass and aluminum framework. Transmission system is fixed on the top of shaft that include a reduer and gears transmition. PLC is responsible for the task of controller and the function of rotational speed is rely on the VVF. People passing in and of the revolving door is checked by the infrared ray sensor, the safety of people are ensured by many contact and non-contact sensors and photoelectric proximity switches. Ultimately, have designed a kind of function practical、safety dependablely revolving door. Key words : Revolving door, Structure, System, Design  目 录 摘 要………………………………………………………………………………………Ⅰ ABSTRACT………………………………………………………………………………………Ⅱ 1 绪论……………………………………………………………………………………………1 1.1旋转门的课题背景……………………………………………………………………………1 1.2 国内外旋转门发展现状……………………………………………………………………1 1.2.1国外旋转门发展现状…………………………………………………………………1 1.2.2国内旋转门发展现状…………………………………………………………………2 2 方案确定………………………………………………………………………………………3 2.1 方案一的设计………………………………………………………………………………3 2.2 方案二的设计……………………………………………………………………………3 2.3 方案的选择…………………………………………………………………………………4 3 门体结构设计…………………………………………………………………………………5 3.1 门结构材料的选用…………………………………………………………………………5 3.2 门结构尺寸的确定…………………………………………………………………………7 3.3 中间轴的设计与轴承的选用……………………………………………………………8 3.4 曲壁部分设计………………………………………………………………………………9 3.5 华盖的设计…………………………………………………………………………………9 4 驱动系