双滚筒绞车运输研究设计与制作毕业设计说明书.docVIP

摘要 本毕业设计的课题来源于主要任务是设计。 在的基础上，对进行了设计，对一些关键部分进行了设计计算。重点是。 本ABSTRCT The design of the subject from “Some coal application project of ZhangQiu”, Main task is suitable for the design of automatic tube dispatch hoist compulsory rope device. Based on double drum drawwork transport reflects the rope is bad, easy to cause the inclined lane wirerope break car accidents, design for lane and slope for 0-25 ° inclined lane rope hoist automatic device, to effectively control and prevention, car accidents, thoroughly improve transportation safety in mines, eliminate inclined lane transportation security hidden danger, in reference to other application rope machine, on the basis of mine is applicable to the double barrel rope hoist scheduling mechanism design, some key parts design calculation. The rope is how the organization, the purpose and forced the rope dynamic source. This design in the double barrel scheduling winch in existing configuration and not big reconstruction of hoist scheduling based on the power of the motor hoist speed and output calculation in design, we make a week in rotating drum under the condition of ball screw rotation to a rope distance is 20 mm. In order to achieve this purpose joined deceleration institutions established transmission relations, not big to hoist the winch and free installation, make mention inoue rope institutions of power comes from the drum, using the sprocket, considering double roller, and applied in the rope of roller drum of ascending and descending, so when the design by the rope. After a rope institutions from power before a rope institution ball screw. To solve the rope and the positive question, drum in transmission between a power conversion device respectively. The transfer process, from the motivation for the cylinder by sprocket to slow conversion device among institutions make ball screw rotation, ball screw speed will speed reduction through the middle conversion device by sprocket after a rope to the organization and it