双鸭山矿业集团东荣三矿1.5Mta的新型矿井设计.docVIP

全套设计CAD图纸，联系QQ 695132052 各专业都有 摘 要 本设计为双鸭山矿业集团东荣三矿1.5Mt/a的新型矿井设计，共有5层可采煤层，平均总厚度为8.85m，煤的工业片牌号为1/3焦煤。设计井田的可采储量为131.9Mt，服务年限为62.9a，划分两个水平开采。 本设计矿井采用双立井的开拓方式，集中大巷及采区石门的布置方式。共划分6个采区，其中首采区为2个，投产工作面2个。本设计采区为南一上区，普通机械化采煤。年工作日为330d，采用“四·六”式工作制，工作面长为180m，每刀进度为0.6m，每日割九刀，后退式开采。 本设计主要涉及矿井开拓、运输、提升、排水和巷道支护等。由于本人知识有限，缺乏一定的现场经验。因此，本设计中难免会出现一些问题，请各位专家老师不吝指正,我将真诚和虚心的接受。 关键词：矿井开拓 巷道支护 矿井运输与提升 集中大巷 Abstract The task of this design is to build a new 1.5 million tons shaft for Shuangyashan Dong rong third Mining Administration.This designed mining has five minable Coal Seams, and its average thickness is 8.85 meters, type of coal seam is 1/3 coking coal. This designed field of recoverable reserves is 131.9 million tons. It can mine for 62.9 years, and is divided into two levels. This mine shaft is planed to double indined shaft development method; Layout of gathering main roadway and gallergand mining district eross heading; This design is divided into 6 mining districts included 2 frist mining districts and 2 working faces for the minable capacity. This design is south 1 aboved mining districts, ords 330 days every year. Adapt “four-six” work situation, working face is 180 meters length of circle is 0.6meters, and times is 9 one day with retreating working. This design is recording to mine development,haulage,hoisting,and drainage,roadway supporting and so on. Because of my limited working ability and time， there must be lots of faults in this design. I pleasd with dirextors point them out and redify it, and I will accept it sincerely and humblely. Key words:Mine development Roadway supporting Mine haulage and hoisting gathering main roadway 目 录 摘 要 I Abstract II 绪论 - 1 - 第1章 井田概况及地质特征 - 2 - 1.1 井田概况 - 2 - 1.1.1 交通位置 - 2 - 1.1.2 地形地势 - 2 - 1.1.3 气象及地震情况 - 3 - 1.1.4 矿区及邻矿的生产建设和规划情况 - 3 - 1.1.5 矿区的经济情况 - 3 - 1.2 地质特征 - 3 - 1.2.1 矿区范围内的地层情况 - 3 - 1.2.2 井田范围内和附近的主要地质构造 - 4 - 1.2.3 煤层赋存状况及可采煤层特征 - 5 - 1.2.4 岩石性质、厚度特征 - 6 - 1.2.5 井田内的水文地质情况 - 6 - 1.2.6 瓦斯、