双鸭山市岭东矿的0.9Mta新井设计.docVIP

全套设计CAD图纸，联系QQ 695132052 各专业都有 摘要 该设计矿井为双鸭山市岭东矿的新井设计，设计生产能力为0.9Mt/a，服务年限54a。井田内共有3层可采煤层，煤层总厚度5.39m,井田平均走向长5000m，平均倾斜长3366m，煤层平均倾角12°，属缓倾斜煤层。 本设计矿井采用双立井的开拓方式，集中大巷布置方式，带区式单水平开采，共划分11个带区，本设计带区为西一带区，一个工作面达产，采煤工作面全部为综合机械化采煤。年工作日为330天，采用“四、六”式工作制，工作面长为200m，每刀进度为0.8m，每日割九刀。 提升设备为主井采用箕斗提升，副井采用罐笼提升。 由于本人知识有限，缺乏一定的实践经验。因此，本设计中难免会出现一些错误，还肯请各位专家老师批评指正。 关键词: 井田开拓 采煤工艺 倾斜长壁 Abstract The mine designed is the Shuangyashan city Lindong new well design, whose designing productivity is 0.9Mt/a, with a service life of 54a. The coal bed belongs to the easy gradient coal bed, which has three mine coals that can be mined.The thickness of the coal level is 5.39m,the average moving length of the well field is 5km, the average inclination length is 3.36km and the average inclination angle is 12°,which belongs to the easy gradient coal bed. This mine shaft is applied to double indined shaft development method; Layout of gathing gallergand mining district eross heading; The well farmland turns to is divided into totally11 adopt mines. This working area is the first west working area, with 330 working days every year and the working situation is four-six type. The working area’s length is 200m with a circle of 0.8m and nine times one day. The rising equipments are box promotes for the main well and cage promotes for the assistant well. Because of my limited knowledge and lack of certain practical experiences, therefore,there will be some mistakes unavoidably in this paper and I expect experts and teachers to point out my mistake sicerely . Key word: Mine development Mining coal craft Incline long wall 目录 摘要 I Abstract II 目录 III 绪论 7 第1章 井田概况及矿井地质特征 8 1.1 井田概况 8 1.1.1 井田位置及范围 8 1.1.2 交通位置 8 1.1.3 地形与河流 8 1.1.4 气象 9 1.2 地质特征 9 1.2.1 矿区范围内的地层情况 9 1.2.2 井田范围内和附近的主要地质构造 9 1.2.3 煤层赋存状况及可采煤层特征 12 1.2.4 岩石性质、厚度特征 12 1.2.5 井田内的水文地质情况 12 1.2.6 沼气、煤尘及煤的自燃性 13 1.2.7 煤质、牌号及用途 13 第2章 井田境界、储量及服务年限 14 2.1 井田境界 14 2.1.1 井田境界确定的依据 14 2.1.2 井田周边情况 14 2.2 井田储量 14 2.2.1 井田储量的计算