鸡西矿业集团盛和煤矿1.5Mta新井的设计（含全套CAD图）.docVIP

需全套CAD或三维图 联系QQ 648328618 摘 要 本设计矿井为鸡西矿业集团盛和煤矿1.5Mt/a新井设计。 此矿区内有四层煤全区可采，分别是23#、34-2#、48#和54#，平均总厚度8.4米。煤层工业牌号为1/3焦煤和焦煤，煤层倾角为20°，地质构造条件简单。设计井田的工业储量为169.83Mt，可采储量为123.9Mt，矿井服务年限为59年，本矿井设计采用立井开拓方案，划分三个水平，采用上山开采，一个工作面达产。采用集中布置，走向长壁后退式采煤法采煤，综合机械化回采工艺。工作面采用刮板输送机运输；区段运输平巷采用带式输送机运输；大巷采用14t架线式电机车牵引，3t底卸式矿车运输，采用1.5t固定式矿车作为辅助运输。通风方式为分区抽出式通风。工作面长度为220m，年工作日为330d，提升方式采用1对16t箕斗提升，净提升时间为16h，采用〝三八〞工作制。 关键词 可采储量 分区抽出式 走向长壁 由于本设计时间有限，本人的工作能力及现场经验也有限，因此在本设计中会出现一些问题，请各位专家及老师批评指正。 Abstract This design mine pit is abundant and the coal mine 1.5Mt/a newwell design for the Jixi mining industry group. In this mining area has four coals entire areas to be possible topick, respectively is 23#, 34-2#, 48# and 54#, the average totalthickness 8.4 meters. The coal bed industry trademark is 1/3 cokingcoal and the coking coal, the coal bed inclination angle is 20°, thegeologic structure condition is simple. The design well fieldcommercial production is 169.83Mt, the recoverable resources is123.9Mt, the mine pit service life is 59 years, this mine pit designuses the vertical shaft development plan, divides three levels, usesclimbs mountains mining, a working surface reaches produces. Uses thecentralism arrangement, moves towards the long wall backlash type topick mining coal, the synthesis mechanization picks the craft.The working surface uses the scraper conveyer transportation; Thesector transports the even lane to use the belt type conveyertransportation; The big lane uses the 14t wire laying type electriclocomotive to tow, the 3t mine car transportation, uses the1.5t stationary type mine car to take the assistance transportation.Ventilates the way to extract the type for the district to ventilate.The working surface length is 220m, the year working day is 330d, thepromotion way uses1pairof16tpromotion, promotes the timeis only 16h,uses 38 work systems. The key word recoverable resources district extracts the type to movetowards the long wall Because this design time limited, myself workin