AVC1200电机座的工艺及其镗孔夹具设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘要 要设计此零件的加工工艺，首先是零件的分析；其次是确定毛坯的制造形式以及制订工艺路线，翻阅《切削余量手册》，确定机械加工余量、工序尺寸、毛坯尺寸、切削用量及基本工时的确定。专用夹具的设计，首先要想好设计方案，找准定位面及各个定位元件所限制的自由度。翻阅《夹具设计手册》及《机械制造工艺手册》确定各个夹具体零件的具体尺寸。 关键词：工艺 夹具 夹紧 定位 ABSTRACT To design parts of this processing, the first parts of the analysis; secondly, to determine the blank forms and the development of manufacturing process line, read Cutting cushion manual, setting machinery allowance, processes size, rough size, cutting parameters and the basic hours of work identified. Special fixture design, the design must first consider good programs, pinpoint positioning face and positioning components of the various restrictions of freedom. Read Fixture Design Manual and Machinery Manufacturing Technology Handbook establish specific folder size of the specific components. Keywords : Process Fixture Synchronizing Location 目 录 中文摘要........................................................................................................Ⅰ 英文摘要........................................................................................................Ⅱ 第一章 绪论..................................................................................................1 第二章 零件的分析......................................................................................2 2.1 零件的作用.........................................................................................2 2.2 零件的工艺分析.................................................................................2 第三章 工艺规程设计..................................................................................3 3.1 确定毛坯的制造形式........................................................................3 3.2 基准的选择........................................................................................3 3.3 制订工艺路线....................................................................................3 3.4 机械加工余量、工序尺寸及毛坯尺寸的确定................................4 3.5 确立切削用量及基本工时.................................................