板材坡口机总体设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 摘要 本文旨在探索板材坡口机的总体设计，即板材坡口机的设计，又称板材坡口机设计。当前我国板材坡口机技术已经有了一定的发展，而且逐渐趋于自动化。 本文根据板材坡口机的工作原理和基本结构，初步设计板材坡口机。在此基础上通过对此题目的分析以及对一些相关书籍和文献的查阅，进一步研究了板材坡口机的总体设计。本文所设计的板材铣边用于电厂中铝板焊接前的坡口成型，板材坡口机的设计重点应在于液压系统和板材坡口机的铣削系统的设计。已完成的主要工作可以概括为以下四方面： 1．对课题的来源、选题的目的、以及板材坡口机在国内外发展的形势及所存在的问题进行了相关的论述。 2．阐述了板材坡口机的一般结构，然后根据自身的需求选取适当的结构组件。简易的叙述了总体方案设计。 3．对液压系统的基本概念、特点、应用以及基本工序做了简要的介绍，进而分析了板材坡口机技术的现状和发展方向。 4．对本设计的重点-板材坡口机的铣削系统进行设计。分析了铣削控制系统的过程，进而对铣削件进行了工艺分析，为板材坡口机铣削系统设计奠定了基础，最后对板材坡口机铣削系统重要的各个尺寸参数进行了校核。 本文通过研究设计板材坡口机的基本原理，获得了大量有关设计板材坡口机的要领。论文的完成对进一步完成生产性设计和探索设计板材坡口机过程有。 Abstract This article thesis is aimed at exploring the overall structure design of plate edge milling machine, that is the design of plank stuff edge milling machine, also called the design of board groove machine.At present,the design of plank stuff edge milling machine already has the certain development,and gradually tends to automation. According to the principle of work and basic structure of plank stuff edge milling machine,the present thesis designs the plank stuff edge milling machine.On the base of these works, through regarding this topic analysis and consulting to some correlation books and literature, were further make clear that the overall design of plank stuff edge milling machine. This present thesis designs the plank stuff mill uses in the power plant before thealuminum sheet welding bevel to take shape. Designs should lie in with emphasis the design of the hydraulic system and milling system . The main work achieved are summed up as following: 1.The related summary was made on the source and goal of task , Domestic and foreign development situation,existence problem. 2.The related summary was made on the general structure,then according to own demand selection suitable structure module.And a simiple narration was made on the overall design of plank stuff edge milling machine. 3.The related summary was made on the basic concept,characteristic,application and essential working procedure,and was