皮圈架座组合机床及专用夹具设计论文【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要它一般采用多轴，多刀，多过程，多方位多站同时处理方法，生产效率高，比一般机器几个几倍到几十倍。作为合作的通用部件已经标准化系列，可灵活配置，可缩短设计制造周期。因此，在大规模生产的低成本和高效率的优点相结合，已被广泛地使用，可用于形成自动生产线。Abstract With the gradual improvement of automation, machine tool more and more in modern factories, machine tool based on common components, together with the specific shape of the workpiece and process design special parts and fixtures, composed of semi-automatic or automatic dedicated machine. It is commonly used multi-axis, multi-tool, multi-process, multi-faceted or multi-station processing at the same time, the production efficiency several times or more higher than the general machine. Common components have been standardized for serialization, can be flexibly configured, you can shorten the design and manufacturing cycle. Therefore, the combination of machine combines the advantages of low cost and high efficiency has been widely used in mass production, and can be used to form an automatic production line. The design for the apron mountings drill special machine tools, completed three hole machining. Mainly the following aspects: (1) to develop a process plan. Learn about the processing characteristics of the machined parts, precision and technical requirements, the positioning clamping and productivity requirements. Determine the combination of machine tool technology content and its processing method. To determine the number of processing steps, determine the type of tool and type. (2)Machine analysis of the structure of the program and OK. According to the technical program to determine the type and the overall layout of the machine. Machine configuration type is selected, it is necessary to consider the process scheme to ensure accuracy, technical requirements and production efficiency; will have to consider the operation of the machine, maintenance, repair, chip case is good. (3) a combination of the overall machine design. Determine the relationship between the various components of the machin