同向旋转型双螺杆挤压机及传动系统毕业设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 关键词：Abstract This article analyzed the food simulation market demand and the production present situation first, through analysis to the prawn cracker and as well as with the traditional processing craft contrast from the theory to use the extruder to produce the food craft feasibility and the economical feasibility. Next, analyzes the single screw rod extruder with the double screw rod extruder characteristic as well as the production craft need, had determined digestion and agitation through the single screw rod extruder first, then uses the double screw rod to extrude the shaper formation the production process. In the base of the extruders in existence, we referenced the mature means of extruder design in our country and abroad and the special working craftwork requires of the snack foods, then, we improved the key structure of extruder. In this text, we introduced the structure design of extruder in detail, particular to the major parts: assignment tank, screw, barrel and systems analysis and calculating. To those important transmission parts: the big gear and the small gears in assignment tank, strip wheel, driving spindle, key, we made a design and check the intensity. And we calculate and check the carrying capacity of the bearing particularly. We also refer to the choosing requirements of the accessories: heating and cooling system, die, knife equipment, and made a simple design. In the end of the text, the installing, operation, controlling and repairing of the extruder were also introduced. Keywords: gears;assignment tank;Twin-screw Extruder  目 录 摘 要 III Abstract IV 目 录 V 1 绪论 1 1.1 本课题的研究内容和意义 1 1.2 国内外的发展概况 3 1.3 本课题应达到的要求 2 双螺杆挤压机设计 7 2.1 双螺杆挤压机的工作原理 7 2.2 挤压加工系统 7 2.2.1 挤压加工系统组成 7 2.2.2 常用挤压术语 8 2.3 双螺杆挤压机零部件结构设计 8 2.3.1 总体结构设计 8 2.3.2 螺杆结构设计 8 2.3.3 机筒结构设计 13 2.3.4 加料系统 13 2.3.5 加热和冷却装置系统 13 2.3.6 模板装置 14 2.4 双螺杆挤压机零部件设计计算 15 2.4.1 主传动系统的设计计算 15 2.4.2 主要传动零部件设计计算和校核 16 2.4.3 螺杆推力的传递 21 2.4.4 螺杆的强度计算 23 2.4.5 机