基于 UPnP 网络化制造系统的研究.pdfVIP

基于UPnP 的网络化制造系统研究 谭大鹏*, 李培玉, 潘晓弘 (浙江大学 机械与能源工程学院， 浙江 杭州 310027) 摘要：针对当前基于 Server/Client 制造系统网络技术中存在的协同性差、缺少动态配置支持等问题，提出了一种基于 新一代网络中间件 UPnP(通用即插即用) 的智能化制造网络系统实现方法。在对现代制造网络系统的构造特点与基本 需求进行分析的基础上，建立了面向制造自动化的网络系统模型，并以 UPnP 技术为核心设计实现了系统网络构架。 利用 UPnP 内部通信接口，建立设备管理标准与网络通信协议，并通过其服务调用机制，实现制造网络系统的智能化 管理。结合嵌入式系统技术，开发了实时数据采集节点、监控中心节点与数据中心节点，为系统提供有力的实时数 据支持。工业现场实验证明：该系统能够实现制造网络各控制节点的自主识别、无缝链接等自适应功能。 关键词：网络制造；UPnP ；自适应；嵌入式 中图分类号：TP273 文献标识码：A Research of Networked Manufacturing System Based on UPnP TAN Da-peng*, LI Pei-yu, PAN Xiao-hong (School of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China) Abstract: Aiming at the problems of networked manufacturing system (NMS) based on Server/Client pattern such as poor cooperation ability, feeble dynamic configuration support etc, a kind of intelligent NMS realization method based on new generation network middleware- universal plug and play (UPnP) was brought forward. According to the construction characteristic and fundamental requirement of modern NMS, network system model oriented to automatic manufacture was established, and the network architecture designed and realized around UPnP technology. Referring to standard communication protocol and application program interface of UPnP, device management criterion and data transform protocol were constituted, and the intelligent management for NMS was realized using UPnP service-calling mechanism. Combined embedded system technology, real-time data collection node, monitoring center node and data storage server were designed, and that supplies powerful real-time data support for NMS. Industry experiments proved that this system can realize self-recognition, seamless linkage and other self