铣削组合机床及其传动装置设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 组合铣床是根据具体情况的需要,对机床进行合理的设计,使其满足加工要求.在现代机械加工中,组合机床系列化因此，组合机床在大批、大量生产中得到广泛应用。ABSTRACT combination milling machine is in accordance with the specific circumstances of the needs of the machine for a reasonable design, to enable it to meet the processing requirements. In modern processing machinery, machine tools portfolio is serialized and Standardization of components for the common basis, and with a small number of dedicated components consisting of a high productivity machine. It has a fairly high degree of automation, processing, stable quality, highly centralized processes, etc. Thus, the combination of a large number of machine tools, mass production to be widely applied. Currently, the portfolio machine being developed efficient, high-precision, high automation and flexible direction. This design is completed right combination milling machine and its transmission device design, make it responsive to the valve body by the Security Council ends before and after the cutting. In this design process, Cutting consider when processing parameters, a reasonable choice of motor power, and the completion of the gearbox Lane at all levels between the drive gear with the rotation axis design and the design, Full consideration of the drive when the drive a series of requirements, such as : transmission ratio, transmission torque, transmission power, etc.. Keywords : 1. Transmission device, 2. Gear 3. Axis 目 录 中文摘要 Ⅰ 英文摘要 Ⅱ 前 言 1 第一章组合机床概述 2 1.1 组合机床及其特点 2 1.2 组合机床的工艺范围及加工精度 2 1.3 组合机床的发展趋向 3 第2章 机床总体设计 4 2.1 机床总体方案设计的依据 4 2.1.1工件 4 2.1.2 刀具 4 2.2工艺分析 4 2.2.1工艺方法的确定 4 2.2.2机床运动的确定 5 2.3确定切削用量 5 2.3.1确定工件余量 5 2.3.2选择切削用量 5 2.3.3机床参数 6 2.4进给驱动电动机功率的确定 8 第3章 传动系统设计 9 3.1计算传动比和分配各级传动比 9 3.2 齿轮设计 9 第4章 传动件的计算的验算 18 4.1 计算各齿轮的基本参数 18 4.2对齿根弯曲疲劳强度验算 18 4.3 轴的设计 22 4.3.1轴Ⅰ的设计 22 4.3.2 轴Ⅱ的设计 22 4.3.3轴Ⅲ的设计 23 4.3.4轴Ⅳ的设计 24 4.3.5轴Ⅴ的设计 25 4.4校核轴 26 第5章 传动装置的结构设计 29 5.1变速器箱体的结构设计 29 5.1.1箱体要具有足够的刚度 29 5.1.2箱体应有可靠的密封及便于传动件润滑和散热 30 5.1.3箱体应力求匀称、美观 30