现场车削提升机制动盘装置以及工艺设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 矿井提升机是煤矿、有色金属矿生产过程中的重要设备。提升机的安全、可靠、有效高速运行，直接关系到企业的生产状况和经济效益。矿井提升系统具有环节多、控制复杂、运行速度快、惯性质量大、运行特性复杂的特点，且工作状况经常交替转换。一旦提升机的行程失去控制，没有按照进给速度曲线运行，就会发生提升机超速、过卷事故，造成楔形罐道、箕斗的损坏，影响矿井正常生产，甚至造成重大人员伤亡，给矿井生产造成重大的经济损失。 所以提升机调速控制系统的研究一直是社会各界人士共同关注的一个重大课题。提升机的制动系统在很大程度上决定了提升机能否实现平稳、安全、可靠地运行。 本文着重设计解决提升机制动系统的制动盘在投入生产以后表面粗糙度发生变化、制动盘发生变形等因素而引起的矿井生产安全问题，在现场对矿井提升机制动盘进行切削，从而对制动盘进行校正，保证了制动盘的表面质量，使得提升机的制动系统能够在矿井的正常生产过程中能够安全可靠地运行。 关键词：矿井提升机 制动系统 制动盘 现场车削 Abstract Mine hoist is important equipment of coal mine, nonferrous metal in the production process. The safe, reliable and effective high-speed operation of the hoist, directly relate to the production status of the enterprise and economic benefits. The mine has lots of characteristics ,for example ,links, improving the system control complex, fast, inertia quality and running complex characteristics, and the working conditions often alternate conversion. Once the hoist travel is out of control, not according to feed speed curve operation, there will be hoist overspeeding and overwind accident , leading to wedge-shaped cans and the damage of the skip, affecting the normal production of mine, and even causing serious injuries, finally it results in significant economic loss for mine production. So hoist speed regulation control system has always been a major issue of common attention for the social people. Hoist brake system determine the hoist can achieve smooth, safe and reliable operation to a great extent. This paper is designed to solve the mine production safety issues caused by factors such as the roughness of brake disk surface change and brake disk distortion after mechanism of promoting the dynamic system put into production. The brake disk calibration after the mechanism of promoting mine move plate cutting on the site, ensure quality of the brake disk surface, making hoist brake system production operate safely and reliably during the normal production process of the mines Keywords: Mine hoist