2015年COMP-L04-CompositeLayup.pptVIP

The idealizations can be specified to apply to the shell based on assumptions about the expected behavior or makeup of the layup. Model verification tools Viewing a Composite Layup Color code by section shows sections computed from the layup. 1 2 2 3 3 1 1 1 4 Viewing a Composite Layup Ply stack plot is a graphical representation from a selected region of a composite model. can be accessed using the Query tool in either the Property module or the Visualization module. Viewing a Composite Layup Display the ply stack plot Example: Composite slat wing In the Property module, click the Query tool and select a region to be queried for ply stack plot. probed region Viewing a Composite Layup The ply stack plot will reside in its own viewport. The user can do the usual view manipulations and printing. The staircase appearance has no physical meaning. Lines drawn on the plies show the orientation angles with respect to the local 1-direction, if the layup orientation is used to define the ply’s orientation. thickness values ply names integration points fiber angles, material names reference plane probed region Viewing a Composite Layup Note: If a user-defined reference CSYS is used to define a ply’s orientation, Abaqus/CAE cannot project the CSYS onto the shell element without knowing the spatial orientation of the element; therefore, no fiber direction will be drawn on the plies. For example, the ply stack plot of the region rib-1. For the same reason, no fiber direction is drawn on the plies if you use a distribution to define the ply’s orientation. rib-1 X Y Z rib1-CSYS Viewing a Composite Layup Customize the appearance of a ply stack plot The Ply Stack Plot Options dialog box is used to customize the appearance of a ply stack plot and can be accessed in either the Property module or the Visualization module. Viewing a Composite Layup Control the display options to view a certain number of plies. Customize the appearance of the plot. thickness values ply names in