《水平倾角测量系统的设计与制作》毕业设计说明书.doc

2014届毕业设计说明书 《水平倾角测量系统的设计与制作》 院 系： 铁道供电与电气学院 班 级： 智能电网111班 学生姓名： 王 娜 指导老师： 张文初 完成日期： 2013.12  摘要 在今天这个科学技术日益发达社会里，智能仪表的生产和使用越来越普遍，尤其在工业控制机器人国防等领域有着广泛的应用。而角度控制技术在科技科技在科研生产实践中占有重要的地位，提高角度检测角度控制的精度，对提高生产效率降低成本节约资源有重要的意义。近年来，角度测量装置迅速发展，它吸引着人们在生活好生产中大量的使用，而这些角度测量装置迅速发展，它吸引着人们在生活和生产中大量的使用，而这些角度测量绝大多数都是采用单片机作为控制单元。 本倾角测量仪能够实现以下功能：传感器将采集而来的信号通过输入接口送人单片机，把结果经输出接口送到显示器。系统采用的了超低功耗的STC89C51系列单片机，ADS1115传感器以及TPS系列等功耗低的元器件，实现了低功耗。本倾角测量仪可以测量0°～90°范围内的任意倾角,分辨率可达0.1，并且具有时数值显示、测量精度高、测量范围大、使用及携带方便等特点，大大提高了工作效率。 关键词：角度 STC89C51系列单片机 倾角测量ADS1113 Abstract In todays society is becoming more and more developed science and technology, the production and use of intelligent instrument is becoming more common, especially in the industrial control robot defense and other fields has been widely used. The Angle control technology in science and technology, science and technology is very important in the research and production practice, improve the accuracy of Angle detection Angle control, to improve the production efficiency to reduce cost saving resources has important significance. Rapid development in recent years, the Angle measuring device, it attracts the people a lot of use in the life good production, the rapid development and the Angle measuring device, it attracts the people a lot of use in the life and production, and the Angle measurement mostly USES the single chip microcomputer as the control unit. This Angle measuring instrument can realize the following functions: sensors will collect the signal through the input interface for single chip microcomputer, the output interface to display the results. System USES the ultra low power STC89C51 microcontroller series, ADS1115 sensors and TPS series components such as low power consumption, low power consumption is realized. This Angle measuring instrument can measure arbitrary dip Angle in the scope of 0 ° ~ 90 °, the resolution can reach 0.1, and has the numerical display