冷却速率对变形与未变形X80管线钢组织影响.pdfVIP

46 8 Vol.46 No.8 2010 8 959—966 ACTA METALLURGICA SINICA Aug. 2010 pp.959–966 X80 Æ ∗ (℄, 110819)  0.7 ,  X80 . : , 0.7 X80 30—80 ,  , , . , . 0.7 , 1—40 /s , , X80 : (+ ) . ℄. X80 0.7 ()  10—20 /s. , , , . X80 , , , (EBSD), (HAGB)  TG115.21 A 0412−1961(2010)08−0959−08 EFFECT OF COOLING RATE ON MICROSTRUCTURE OF DEFORMED AND UNDEFORMED X80 PIPELINE STEELS DENG Wei, GAO Xiuhua, QIN Xiaomei, GAO Xin, ZHAO Dewen, DU Linxiu State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 Correspondent: DENG Wei, Tel: (024 E-mail: denvy2004 @ Supported by the Fundamental Research Funds for the Central Universities (No.N090607002), Na- tional Natural Science Foundation of China (No and State Key Laboratory Self–determination Foundation (No.RAL–SD–2008–2) Manuscript received 2010–01–15, in revised form 2010–04–21 ABSTRACT The effects of cooling rate and deformation on microstructures of an X80 pipeline steel were investigated by thermo–mechanically simulated tests heated up to the same temperature and cooled at different rates under 0 and 0.7 true strain deformation. The results reveal that the start temperature for bainite transformation will be increased by 30—80 higher under 0.7 true strain than under no deformation. But the increase of cooling rate depresses the start temperature for bainite transformation and accelerates the progress of its transformation. It is found that the microstructure of the cooled samples without deformation is all composed of bainite with prior austenite grain boundaries (PAGB), but it is complicated for the cooled samples