2000m3运沙船性能计算【毕业论文】.docVIP

本科毕业论文 （20 届） 2000m3运沙船性能计算 目录 摘要 2 1、前 言 4 2、总体部分 5 2.1任务书与母型船资料分析 5 2.2设计船排水量及重量计算 6 3、性能部分 8 3.1型线 8 3.2船舶几何形体输入、邦金曲线计算 11 3.3静水力计算 21 3.4船舶静水力曲线图绘制 26 3.5 横交曲线计算 27 3.6舱容计算 31 4、装载计算和稳性校核 42 4.1功能简介 42 4.2计算原理 42 4.3计算步骤 42 5、吨位计算 53 5.1 吨位概述 53 5.2 船舶主尺度 53 5.3 吨位丈量 53 5.4 吨位计算 60 6、干舷计算 62 6.1 干舷 62 6.2 主要参数和干舷计算 62 7、小结 66 [参考文献] 68 附录：外文翻译 69 中文译文 75  [摘要]运沙船顾名思义就是运载泥沙的船舶，适用于我国沿海航区设计主要 [关键词] 运沙船；静水力计算；装载计算；COMPASS软件；干舷计算；吨位计算 Performance Calculation of 2000m3 Sand Barge [Abstract] Sand Barge is means of ship for loading sand along the coast for coastal sea areas. The ship is fully welded steel , which has a single and continuously deck, the stern has three deckhouse, the stem has a 0.3 m rise of first, containing double engines and sculls ,streaming and double bearing balanced rudder. This design is primarily for 2000m3 Sand Barge performance calculation, refer to the task of the book to request of this ship, and the given ship’s dimensions, the lines plan, general arrangement and body section to make the performance calculations. The design is divided into four parts, the first part: hydrostatic calculation hull, mainly by compass bring in the hull geometry, including the calculation of state gold curve and hydrostatic calculation. The second part: typical load calculation and check of stability, also by compass do the cross curves calculation, cargo cubic calculation and loading calculation. The three part: freeboard calculation, mainly based on the freeboard calculation rules of Ships and offshore installations statutory inspection rules(2004). The four part: tonnage calculation, mainly based on the International Convention on Tonnage Measurement of Ships(1969). [Keywords] Sand Barge; Hydrostatic calculation; Loading calculation; COMAPSS software performance；Freeboard calculation Tonnage calculation 1、前 言 运沙船顾名思义就是运载泥沙的船舶，说起它的历史那真是源远流长，它始于唐朝，兴盛于元明，在清朝中期最为兴盛[5]。而在当代，它仍然是内河运输泥沙的不二选择。所以它的重要性不言而喻。 近一、二十年来，随着我国改革开放的不断深入，特别是“保增长、扩内需、调结构”政策的有效实施，神州大地到处呈现