本科生毕业设计东湖市给水工程设计（酚超标）.docxVIP

东湖市给水工程设计（酚超标）专业：给水排水工程摘要：该设计主要是通过对有机微污染水源水工艺处理的研究，针对四川省东湖市水源酚超标情况进行的给水工程的设计。在该设计中通过水源点的选取、设计用水量的确定、取水泵站的设计、输配水管网不同方案的比较、确定和设计以及净水厂工艺流程的选定和单元处理构筑物的详细计算，来完成整个东湖市给水工程的设计，使出水的水质，水量，水压等各方面均满足规范要求。经过研究几种方案对酚类物质的去除率以及其他方面的综合比对，最终选择使用二氧化氯预氧化的方案进行工艺流程的设计。原水经过取水构筑物的收集和净水厂处理之后，成为满足饮用水标准的成品水，继而经过二泵站加压，最后通过输配水管网将成品水安全送达用户。在设计的最后给出了设计总结和一些在完成过程中的心得。关键词：取水泵房设计，管网设计，净水厂设计，酚超标The water engineering design of Donghu city-with exceeding amount of phenolWater and wastewater engineeringStudent Ya Liu Academic advisor Yao Chen, Yao FuAbstract: Through researching on the technology of the slightly polluted water, There is a water supply engineering which is designed for the water source with exceeding amount of phenol in Donghu, Sichuan. Select and determine the position of water source firstly, then determine the design water consumption, thirdly, design the water intake pumping station, and then compare and determine the several solutions of water distribution systems, determine the treatment process and calculate the size of every unit and make sure the quantity, the quality and the water head to content the requirement of the standard. After researching the removal rate of phenol of several solutions and comparing other aspects, the solution named the chlorine dioxide oxidation is chosen to design. After collected by the intake pumping station and treated by the water treatment plant, the raw water is converted to product water and then it will be pressurized by secondary pump station, at last, the product water will be delivered to the user safely by water distribution systems. At last, give the conclusion and experience.Key words: Pumping station design, network design, water treatment plant design, exceeding amount of phenol目 录第一章 工程概述11.1 东湖市基本概况31.1.1 城市概况31.1.2 给水现状及规划31.2 设计任务及其范围31.2.1 设计任务31.2.2 设计范围31.3 主要设计资料31.3.1 气象资料31.3.2 水文地质资料31.3.3 工程地质资料31.3.4 其他资料3第二章 取水水源及取水32.1 水量计算32.1.1 城市规划中的用水量计算32.1.2 设计参数的选取及用水量的计算32.2 取水构筑物的选择和设计32.2.1 水源种类、取水地点、取水构筑物类型的比较和选择32.2