icemsurf 显示视图.pptVIP

H:\ota-training\kddat\blend exercise H:\ota-training\kddat\blend ICEM surf Training Display and View By implementation Consultant Peter Chen ~Active: - pull down menu the function Display - Display - *Display - Display -object types to be displayed and determine their display characteristics. - by the shortcut Ctrl-A Note: In case of surfaces only the wire frame display is controlled and the shading switched on and off. The assignment of colors and materials to shaded surfaces is done with the function Display - Material. ~物件顯像的設定控制 *Selected: ~on:(settings for selected objects) Note:Windows -Highlight1. *Individual: ~ individual color and material Note:Display - Colors and Display - Material. ~off, all with the default materials/colors. 視窗左手邊為預設好之選擇，點 選則轉換設定 - Object 掌管顯示的開關 Line/Point , Label , color 則為顯示 時屬性的設定 ~在工具箱中啟動Display將會引動以下視窗開啟 ~Variant *The first list contains predefined display variants,can neither be deleted nor renamed, Raw Data Curve Edge Iso-Curve CtrlP Shading Highlight Scan Scan Facets *The second list contains the user-defined variants. ~Anti Alias: curves and diagnostic lines can be displayed sharper and with less antialiasing (staircase effect). 對points 可控制的條件 對Raw Data 可控制的條件 對 Curve 可控制的條件 對 Surfaces 可控制的條件 對 Scan Data 可控制的條件 *Display - View - create user-defined views and save them for further use ~Active: - pull down menu the function Display - View -by the icon in the service functions block. -Views can be parallel or perspective. The central projection is defined by the Eye Point , the Focal Point , and the Focal Length . *Display - View Layout - views can be simultaneously displayed