Linux2.6.35内核LCD驱动s3c-fb.c的分析.docVIP

/* linux/drivers/video/s3c-fb.c * * Copyright 2008 Openmoko Inc. * Copyright 2008 Simtec Electronics * Ben Dooks ben@simtec.co.uk * http://armlinux.simtec.co.uk/ * * Samsung SoC Framebuffer driver * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include linux/kernel.h #include linux/module.h #include linux/platform_device.h #include linux/dma-mapping.h #include linux/slab.h #include linux/init.h #include linux/clk.h #include linux/fb.h #include linux/io.h #include mach/map.h #include mach/regs-fb.h #include plat/fb.h /* This driver will export a number of framebuffer interfaces depending * on the configuration passed in via the platform data. Each fb instance * maps to a hardware window. Currently there is no support for runtime * setting of the alpha-blending functions that each window has, so only * window 0 is actually useful. * * Window 0 is treated specially, it is used for the basis of the LCD * output timings and as the control for the output power-down state. */ /* note, some of the functions that get called are derived from including * mach/regs-fb.h as they are specific to the architecture that the code * is being built for. */ #ifdef CONFIG_FB_S3C_DEBUG_REGWRITE #undef writel #define writel(v, r) do { \ printk(KERN_DEBUG %s: %08x = %p\n, __func__, (unsigned int)v, r); \ __raw_writel(v, r); } while(0) #endif /* FB_S3C_DEBUG_REGWRITE */ struct s3c_fb; /** * struct s3c_fb_win - per window private data for each framebuffer. * @windata: The platform data supplied for the window configuration. * @parent: The hardware that this window is part of. * @fbinfo: Pointer pack to the framebuffer info for this window. * @palette_buffer: Buffer/cache to hold palette entries. * @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/ * @index: The window number of this window. * @palette