船舶词汇(14-53).xlsVIP

附6 附5 附录4 附3 附录2 附1 (2) 附1 YZ W UV T S R Q P O N M L JK I H G F E D C B A cover laroux 手镯式阳极 branch member 支杆 breathing apparatus , respirator 防毒面具 bridge 栈桥 bridge (overhead) crane 天车吊 brittleness 脆性 brush coating 用毛刷涂漆 buckle fastener 绑带 bulb angle 球扁钢 build-up girder 组合梁 bulk head 隔板，舱壁 C catenary anchor leg mooring (CALM) 悬链锚腿系泊 cable layer 敷缆船 cathodic protection 阴极保护 cable rack /tray 电缆托架 cellar deck 底甲板 caisson 沉箱 cellar shutdown panel (CSDP) 井口系统关断盘 caisson washing pump 洗舱泵 cement grout 水泥浆 caisson-type platform 沉箱式平台 cementing vessel 固井船 can （管件的）段 center line 中心线 cantilever beam 悬臂梁 center of buoyancy 浮心 cantilever jack-up rig 悬臂自升式钻井船 center of floatation 漂心 cantilever well module 悬臂式井口模块 center of gravity 重心 cap beam 帽梁 center punch 冲子 capped steel 半镇静钢 central control room (CCR) 中央控制室 capsizing lever 倾覆力臂 central processing platform 中心处理平台 capsizing moment=overturn moment 倾覆力矩 centrifugal pump 离心泵 carbon arc air gouging centrifuger 离心机 carbon dioxide cylinder 二氧化碳气瓶 ceramic fibres 防火陶棉 carbon equivalent 碳当量 ceramic tiles 瓷砖 carbon-dioxide(CO2) arc welding 二氧化碳气体 保护电弧焊 certifying authority 第三方检验机构 cargo master system 货油舱总监控系统 chain block 倒链 cargo tank cleaning machine 洗舱机 chair with arm-rests 带扶手的半软椅 carrier （搬运〕小车 chamfering carry out = perform = conduct = execute 进行、执行 channel steel 槽钢 charpy-V notch energy 夏比V形缺口韧性值 closed drain tank 闭式排放罐 charpy-V notch impact test 夏比V形缺 口冲击试验 clustered well heads 丛式井口 chart datum 海图基准面 CO2 cylinder unit CO2 气瓶组 check randomly 抽检 CO2 extinguisher CO2 灭火器 check valve 止回阀 coal tar epoxy paint 含焦油环氧涂料 checkered plate 花纹板 coaming 档水扁钢 chemical composition 化学成分 coating 涂装 chemical injection package 化学注入撬 coating interval 涂漆间隔 chemical injection system 化学药剂注入系统 coefficient 系数 chemical seal 化学密封 cold formed pipe 冷卷管 chipping hammer 敲渣锤 cold shut 冷隔 chisel 风铲 cold work 冷加工、冷作 chord member 弦杆 collapse ring 加强环板 Christmas tree 采油树 column 立柱 circumference 周长 combustible gas detector 可燃气体探测器 circumferential weld 环焊缝 come-a