ISO148-1：2009 金属材料－夏比摆锤冲击试验－第1部分：试验方法(E).pdfVIP

INTERNATIONAL ISO STANDARD 148-1 Second edition 2009-11-15 Metallic materials — Charpy pendulum impact test — Part 1: Test method Matériaux métalliques — Essai de flexion par choc sur éprouvette Charpy — Partie 1: Méthode dessai Reference number ISO 148-1:2009(E) © ISO 2009 ISO 148-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2009 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without