延迟焦化除焦系统节能降耗措施.docVIP

延迟焦化除焦系统节能降耗266500） 摘 要：本文介绍了某焦化装置2008年5月开工初期除焦系统因除焦设备磨合期问题较多、人员不熟悉操作环境、设备设计存在缺陷等因素制约，出现除焦时间长、能耗偏高问题。重点介绍了车间通过采用更换切焦器喷嘴、使用水马达及Ⅶ型联合切焦器等措施大幅度降低除焦时间、降低装置能耗。为同类装置除焦系统设备节能提供了借鉴。 Abstract: This article describes some problems of the long decoking time and the high energy consumption in a coking unit started early in May 2008, that because more problems on the equipment of the decoking system in break-in period, people not familiar with the operating environment, the flaws of the equipment design and other factors. It highlighted the workshop significantly reduce the decoking time and the device pow