GPRS无线算法及参数设置.ppt

GPRS RADIO ALGORITHMS Chapter content Objective : Describe the algorithms,parameters and indicators used onthe radio interface program: 1.1 Allocation and de-allocation of radio resources 1.2 TBF radio resource re-allocation 1.3 Cell selection and re-selection 1.4 Up-link power control 1.5 Coding scheme adaptation 1.6 Radio link supervision 1.1 Allocation/de-allocation of radio resources (1)Traffic evaluation GPRS resource activation is a dynamic process applied on several PDCH group per cell in B7, on each PDCH group in B6 Computation of Maximum and Minimum number of PDCHs available per cell based on Cell Load Evaluation Performed inside the BSC Long term evaluation : 1-2 minutes Other uses handover preparation in GSM 1.1 Allocation/de-allocation of radio resources (2)Diagram 1.1 Allocation/de-allocation of radio resources (3)Cell Load Evaluation in B7 Calculation of averages : non sliding average AV_Traffic_Load_GPRS representing the global load (circuit + packet) of the cell LOAD_EV_PERIOD_GPRS samples : 100 * (1 - Nb free TCH / Nb tot TCH) Nb tot TCH : total number of TS in the cell for TCH and PDCH Nb free TCH : number of free TS not used by a TCH or a PDCH (TS disabled not computed) 1 sample every TCH_INFO_PERIOD seconds 1.1 Allocation/de-allocation of radio resources (4) GPRS traffic load state evaluation in B7 Based on the calculation of the maximum number of PDCH to be allocated : MAX_PDCH_DYN (BSC) Feature activation: EN_DYN_PDCH_ADAPTATION=Enable otherwise, B6.2 process is applied One threshold : High_Traffic_Load_GPRS Inputs : Nb_PDCH and AV_Traffic_Load_GPRS MAX_PDCH_DYN(BSC) = MIN {MAX_PDCH ; max [ MAX_PDCH_HIGH_LOAD ; nb_PDCH – (AV_Traffic_Load_GPRS – High_Traffic_Load_Gprs) x (nb_TS/100)] } 1.1 Allocation/de-allocation of radio resources (5)Cell Load Evaluation in B6.2 Calculation of averages : OUPUT = non sliding average AV_TRAFFIC_LOAD representing the global load (circuit + packet) of the cell A_TRAFFIC_LOAD samples : 10