钢筋混凝土结构粘钢加固质量检测试验研究.pdfVIP

i EXPERIMENTAL STUDY ON QUALITY TEST OF REINFORCED CONCRETE STRUCTURES STRENGTHENED BY STICKING STEEL ABSTRACT Reinforced concrete structures are applied extensively in civil engineering, but existing structures will damage and age continuously with time. So strengthening technique of reinforced concrete structures is appeared. Particularly, sticking steel technique is developed quickly and liked by most designer and user. In the process of sticking steel plate, bonding strength between steel plate and original structure is a key to assure the effect of strengthening. Therefore, it is very necessary to test the bonding strength. Currently, reliability of quality testing between steel plate and concrete structure member depends on the testing person’s experience and judgment. Consequently, according to characteristics of sticking steel technique, studying a more practical method of testing bonding compaction degree and bonding strength has very important practical significance for application of the technique. In this study, pull-peeling test are carried out on nine reinforced concrete specimens with different bonding compaction degree, and their strength grade of concrete are verified by core drilling method. Then, the failure characteristics of bond surface are observed and the bond mechanism between steel plate and concrete are analyzed. Correlativity curve between bonding compaction degree and front-pull bonding strength is obtained through regression analysis of test data. At the same time, two reinforced concrete specimens are tested through ultrasonic wave method. The error between