应用知识工程方法的基于网络的自动冷却故障解除系统.docVIP

A Web-based automotive refrigeration troubleshooting system applying knowledge engineering approach 应用知识工程方法的基于网络的自动冷却故障解除系统 Janus S. Liang * Department of Vehicle Engineering, Yung-Ta Institute of Technology and Commerce, 316, Chunshan Road, Linlo, Ping Tung, 909, Taiwan 台湾909屏东县，Linlo。中山路，316,Yung-Ta科技与商贸学院，车辆工程系 A R T I C L E I N F O 文章信息 Article history: 文章经历 Received 20 September 2008 2008.9.20号收到 Received in revised form 20 May 2009 2009.5.20收到修改版 Accepted 5 July 2009 20097.5.采纳 Available online 30 July 2009 2009.7.30文章在网上发布 Keywords: 关键词 Knowledge-based troubleshooting system基于知识的故障排除系统 Automotive refrigeration system自动冷却系统 Virtual reality虚拟现实 A B S T R A C T 摘要 This study describes the generation of Web-based troubleshooting system for automotive refrigeration system using knowledge engineering approach over the Internet. The relevant technologies used in the system are discussed in detail. The aim of the proposed knowledge-based troubleshooting system (KBTS)is to integrate the troubleshooting process of automotive refrigeration system into a single architecture for retrieving knowledge and experience of technicians in automobile repairing field. The application ofKBTS guides the novice or learner through different stages of the troubleshooting process enabling the creation of problem-solving list, its contents include the selection of hand tools and instrument, decision of detecting methods, procedure of disassembling/reassembling component, adjusting, and so on.Through the use of web and knowledge approach, the troubleshooting knowledge of automobile refrigeration system can be effectively incorporated into the procedure generation framework and a Web-based troubleshooting procedure generation system can also be implemented. 2009 Elsevier B.V. All rights reserved 本研究描述了用因特网上的知识工程方法来生成基于网络的自动冷却系统的故障排除系统。此研究详细讨论了系统中使用的相关技术。提出基于知识的故障排除系统(KBTS)的目的是为了把自动冷却系统的故障排除过程整合到一个单一的结构中以便于检索汽车维修技术员的知识和经验。应用基于知识的故障排除系统(KBTS)来指导新手或初学者学习不同的故障排除阶段，这样可以产生一个问题解决清单。它的内容包括选择手动