车辆工程毕业设计（论文）-RL5040XLC冷板式冷藏汽车改装设计【全套图纸】.doc

本科学生毕业设计 RL5040XLC冷板式冷藏汽车改装设计 系部名称： 汽车与交通工程学院 专业班级： 车辆工程 学生姓名： 指导教师： 职 称： The Graduation Design for Bachelors Degree Refitting Design of Refrigerating Automobile on RL5040XLC Cooling-plate Refrigeration Candidate： Specialty：Vehicle Engineering Class：Supervisor：Associate Prof.  摘 要 随着我国高速公路的迅猛发展，公路冷藏车运输越来越显示出其快速发展的趋势。因为运输的集装化及环境保护意识的提高，货物运输不仅要求其运输的快捷安全，而且要求被运输货物的质量能保鲜。 全套图纸，加153893706 关键词：专用车设计；冷藏汽车；冷板；制冷量；隔热车厢；副车架 ABSTRACT With the rapid development of our countrys highway, the transports of highway refrigerator trucks have showed their rapid development trend. Because of the requirement of containerized shipment and the conscious of environmental protection, the cargo transport not only requires rapidness and safety, but also the quality of the goods must be retained freshness. So the production and application of refrigerator trucks have higher requirements. This design depends on CA1103P9K2LE chassis from FAW with the 10,000kg total mass, -5℃ the lowest degree and 4 hours maximum endurance. This design includes refrigerated equipments, insulation carriage and sub-frame. This design uses the independent type of cooling-plate for refrigeration with the help of the ground refrigeration unit to reduce the weight with full equipments. Using choose subdivision type as insulated body and using platform floor as sub-frame doesn’t only make process sample but also save the cost. And it also can satisfy short distances transportation’s requirement of economy and usefulness. Keyword: Special Vehicle Design, Refrigerated Vehicles, Cooling-plate, Cooling Capacity, Insulation Carriage, Sub-frame  目 录 摘 要 1 Abstract 2 第1章 绪 论 3 1.1冷藏车的概述与意义 3 1.2冷藏车的发展概况 3 1.3我国冷藏车的发展 4 1.4我国冷藏车的生产和技术概况 5 第2章 二类底盘的选择 6 2.1二类底盘的选择原则 5 2.2二类底盘的参数介绍 6 2.3本章小结 7 第3章 冷藏车的分类及总体布置 8 3.1冷藏车的种类及原理介绍 8 3.2 制冷方案分析 8 3.3 冷板式冷藏车的结构布置 9 3.4本章小结 10 第4章 隔热车厢的分类与设计 11 4.1隔热车厢的定义、分类与组成 11 4.2隔热车厢的结构特点