水平气液两相管流计算方法对比研究毕业论文.doc

重庆科技学院 毕业设计（论文） 题 目 院 （系） 专业班级 学生姓名 学号 指导教师 职称 评阅教师 职称 2013年 月 日封面（按教务处制定的标准封面格式制作）中文摘要（300字左右）、关键词 外文摘要、关键词 目次页（附件不统一编入） 论文主体部分：引言（或绪论）、正文、结论参考文献附录（对论文支持必要时） With the petroleum, chemical and nuclear industries, gas-liquid two-phase flow people pay attention to the growing problem. In the petroleum, chemical, boiler and nuclear reactors device, widely encountered gas-liquid mixture in an inclined pipe flow. In the oil and gas exploitation of oil or gas in the process, almost inevitably involve multiphase mixture drug fluid movement. When oil production, natural gas has also been mined simultaneously, and often also contain water. Gas-liquid two-phase flow when a new branch of fluid mechanics, which studies the gas and liquid two-phase flow conditions in the common medium flow rule. Two-phase flow is a solid, liquid, gas phase, any two of the three phases are combined, a flow system with the interface. By gas - liquid, liquid - solid or solid - gas combinations thereof, natural and industrial applications is a common fluid flow phenomena. This design is the application of three kinds of single model and a combined model of the pipeline pressure loss calculation. And given the calculation results and actual field measurements for comparison and error analysis. In the design process, according to the mission statement given length of the pipeline and oil and gas parameters, calculation of the mixture mixed pipeline parameters, and then identify three kinds of single model for pressure drop calculations pipeline segment, and then use a combined model segments of the pipeline again for Pressure Drop. Finally, the calculated error value with the measured comparison. Keywords：Horizontal pipe Two-phase Fluid Calculate Error  目录 1绪论 1 1.2国内外研究现状分析 2 1.2.1多相流混合物参数的研究 3 1.2.2