毕业设计（论文）-冲压废料自动输送装置设计.doc

内 容 提 要 目前很多冲压生产线的模下废料均由人工清扫，机箱装载。手工生产线需停机清扫。自动生产线虽不停机，但清扫时极不安全。同时手工清扫废料及目前废料收集方式使整个生产现场显得零乱。废料满地散落，场地不清洁，人工清除废料势必停机作业，影响生产效率。 随着产品更新替换速度的加快，产品的规格变化多端，多种少量之生产方式已非常之普遍。各种模具垫脚，垫脚间距几何位置不一，并随快速换模的导入，夹模器的干涉，规格品的输送装置已无法适应。如何从模下自动清除废料，并适应其种种之变化，成为同行业界的一个难点。为满足生产的需求，提高工作效率，一种独特的输送装置可自行清除模下废料。该装置由安装架、工织皮带输送带、废料输送机等部件组成。该输送装置设计的独特之处在于：使用一台马达同时驱动多条输送带，解决了一台马达驱动一条输送带所带来的横向空间不够的问题；输送带横向位置可任意调整，已适应不同的垫脚位置；一种输送带宽度可适应一定范围的垫脚间距，输送带可任意组合，已适应不同宽度；换模时可方便地移动输送带，且各皮带整体及单个皮带伸入模具下的深度可调，适应不同的模具尺寸；换线时，可方便地更换输送带；超薄皮带可越过夹模器或压板的阻挡，更好地利用空间。 冲压废料自动输送装置是一种适应性强，效率高，安全可靠，灵活多变的组合式废料输送设备，配以链板式输送机，对每一条生产线的废料进行集中收集，或配以电磁送料机，废料箱进行单台冲床废料收集，从而可进一步提高冲压生产的自动化程度，实现冲压作业区的无人化，极大地提高生产效率。 Ramming waste material automatic Installment Summary At present under very many ramming production line mold waste material by hand sweeping, case loading. The manual production line needs the engine off to sweep clear. Automated production line although not engine off, when sweeps clear is not extremely secure Simultaneously manually sweeps clear the waste material and the present waste material collection mode causes the entire production scene to appear in disorder. The waste material everywhere scatters, the location is not clean, the man-power will clear away rubbish inevitably the engine off job, will affect the production efficiency. Along with product update replace speed speeding up, the product specification , the many kinds of few production method has been extremely common. Each kind of mold pad foot, fronts the foot spacing several positions not one, and along with fast trades the mold inducting, clamps the mold interference, the specification feed way has-been unable to adapt. How automated clears away rubbish from the mold, and adapts its all sorts of changes, becomes the colleague field difficulty. In order to satisfy the production the demand, enhances the working efficiency, one kind of unique feed way may voluntarily clear under the mold the waste material. This equipment by is peaceful, the labor weaves part