机械原理(双语)试卷2.pdfVIP

《机械原理（双语）》课程试卷 2 得分 评阅教师 Checkpoint ( mark your answer on the answer sheet by True or False) 一、 (20 points 2 points/each ) 1．The links within a mechanism can have determined relative motions if and only if the DOF of the mechanism is greater than zero and equal to the number of the driving links ( ) 2. During the group dividing of mechanism, if the DOF of the group is zero, then the group is called Assur group ( ) 3. Any three independent links in general plane motion must have three instant centres, the three instant centres may lie on a common straight line. ( ) 4.If a mechanism comply with the Grashof’s criterion , then the mechanism must have a crank. ( ) 5. A rotor is statically balanced if it has been dynamically balanced. ( ) 6.In the velocity polygon ,The vector connecting the any two points except point p represents relative velocity between them and the direction is opposite to the velocity’ symbol ( ) 7. The analysis with dynamic static is analysis of the mechanism force with exception of the inertia force, applying into the case of low velocity mechanism. ( ) 8. In a crank-rocker mechanism, the rocker DC reaches its two limiting positions DC1 and DC2. if the crank AB is a driver, then the limiting positions are called dead points . ( ) 9. The pressure angle remains the same at all points on the tooth profiles of the rack (ak=a), which is also called the normal pressure angle. ( ) 10. The transmission ratio of worm gearing (worm is driver) can be calculated by the formula i =d /d ( )