课程设计（论文）-基于AD590温度采集系统的设计.docVIP

课 程 设 计 任 务 书 题 目 基于AD590温度采集系统的设计 系 (部) 信息科学与电气工程学院 专 业 电子信息工程 班 级 电信091 学生姓名 学 号 12 月 26 日至 12 月 30 日 共 1 周 指导教师(签字) 系 主 任(签字) 年 月 日 摘要 温度是工业生产和自动控制中最常见的工艺参数之一。过去温度系统设计中,采用模拟技术进行设计,这样就不可避免地遇到诸如传感器外围电路复杂及抗干扰能力差等问题;而其中一环节处理不当,就造成整个系统性能的下降。随着技术的速发展,特别是大规模集成电路设计技术的发展, 数字化、、成为传感器发展的要方向8位A／D转换器的工作时序，给出80C51单片机与ADC0908并行A／D转换器件的接口电路图，提出基于器件工作时序进行C语言程序设计的基本技巧。本系统包括温度传感器，数据传输模块，温度显示模块和温度调节驱动电路，其中温度传感器为数字温度传感器AD590，包括了单总线数据输出电路部分。文中对每个部分功能、实现过程作了详细介绍。 关键词：单片机、C语言、ADC0809、温度传感器AD590 Abstract Temperature is the most common one of process parameters in automatic control and industrial production. In the traditional temperature measurement system design, often using simulation technology to design, and this will inevitably encounter error compensation, such as lead,complex outside circuit,poor anti-jamming and other issues, and part of a deal with them Improperly, could cause the entire system of the decline. With modern science and technology of semiconductor development, especially large-scale integrated circuit design technologies, digital, miniaturization, integration sensors are becoming an important direction of development. In the control systems with the core of SCM，Visual C language programming is used to achieve the control of the whole system．Combining with the operation sequence of ADC0809，the interface circuit diagrams of 80C51 SCM and ADC0809 parallel A／D conveger ale given．The basic skills of Visual C language programming based on the operation se—quenee of the chip ale put forward．This system include temperature sensor and data transmission, the moduledisplays module and thermoregulation driven circuit from the sensors intofigures of the temperature sensors AD590, including a list of the data outputcircuit. The text of every part of the functions and procedure at pre