基于虚拟样机的装备故障灵敏度分析及参数阈值获取.pdfVIP

Vol. 17 No. 10 Oct. 2005JOURNAL OF SYSTEM SIMULATION ·2395 · 1,2 1 2 , , 1 2 , 050003 , 210007 ADAMS 1004-731X (2005) 10-2395-04 TJ306; TP309.9 A Relative Sensitivity Analysis of Typical Faults of Armament and Thresholds Achievement Based on Virtual Prototyping 1,2 1 2 JIA Chang-zhi , WANG Xing-gui , GONG Lie-hang 1 Department of Mechanical Engineering, Mechanical Engineering College, Shijiazhuang 050003, China; 2Engineering Institute of Engineering Corps, PLA University of Science Technology, Nanjing 210007, China Abstract: As conventional land-based military equipment, guns are playing a key role in local wars in recent decades. The typical faults of guns were analyzed, and three indexes to represent guns performance were put forward and three working principles of guns were deduced. Virtual prototype of some-type gun was created by using of ADAMS, and the validation was suggested by comparisons of simulation and test results. The degrees of guns faults affecting performance indexes were obtained based on relative sensitivity analysis, thus the comparison difficulty of fault parameters with different dimensions was solved, and parameter thresholds of guns faults were achieved through virtual prototype according to firing limits of guns. Finally, the perspective of virtual prototyping technology applied in fields of armament engineering was presented. Key words: gun; fault; virtual prototyping; sensitivity analysis