基于Matlab的数控磨削球面粗糙度分析及仿真.pdfVIP

# # : 1001- 2265( 2010) 03- 0016- 06 基于Matlab的数控磨削球面粗糙度分析及仿真 张坤领, 韦建军 (河池职业学院机电系,广西 河池 547000) :文章通过对数控磨削球面的表面粗糙度的形成机理分析,建立了磨粒 迹坐标系的数学模型并进 行计算; 然后利用Matlab软件对数控磨削球面的加工 迹进行了仿真, 且对砂轮的形貌, 如相邻磨粒的 间距以及磨粒高度的随机分布建立了公式,进而编制M 文件计算不同参数变化时表面粗糙度的取值, 采 用列表的方式对影响磨削球面表面粗糙度的各个影响因素综合比较, 得出合理选择数控磨削球面时加 工方式及砂轮的粒度和浓度砂轮转速及砂轮直径工件转速及工件直径工件的加工部位等各项因素 的综合方法 :磨削;M atlab; 粒度; 表面粗糙度 : TH16; TG65 : Analysis and Simulation ofNumericalControlGrinding SphericalRoughnessBased onMATLAB ZH NG Kunling, WEI Jianjun (M achineryE lectronicDepartmen,t Hechivocation Institute, HechiGuangxi547000, China) Abstract: The article has established the abrasive path coordinate system smathematicalmodeland carries on the computation, through analyzing the numerical control grinding spherical surface s surface roughness s for mationmechanism; Then has carried on the smi ulation using the M TL B sofwt are to the numerical control grinding spherical surface s processing path, and has established the formula about grindingwheel s appear ance, such as the neighboring abrasive s spacing, the abrasive high random distribution, then establishes the M docum ent computation different parameter variation surface roughness s value, uses the tabulation to com parew ith each influencing factor to thegrinding sphericalsurface roughness, obtains an comprehensivemethod to choice each factor, such as the numerical controlgrinding spherical surface processes and grindingwheel s granularity and the density, the grinding wheel rotational speed and the grinding wheel diameter, the work piece rotational speed and thework piece diameter, thework piece processing spot and so on. Key ords: grinding; M atlab; granularity; surface roughness