QCT484-1999标准（英文版）.docVIP

Instruction for Change of Standard Number According to the requirements of standard letter [1998] No.216 of State Bureau of Quality Technical Supervision and the reply of State Bureau of Machine Building Industry to [1999] No.126, the standard number JB/Z 111-86 is changed to industrial standard number QC/T 484-1999 with the content unchanged. The new standard number shall be used for the reference. Technical Guidance Document of Ministry of Machine Building Industry of the People’s Republic of China Paint Coating for Automobile JB/Z 111 – 88 Superseding JB/Z 111-74 This standard applies to paint coating for automobile, but not to paint coating of electrical devices and instruments of automobile. 1 Specifications of Paint Coating Code According to different application conditions of automobile parts and quality requirements for painting and specifications in Table 1, paint coatings are divided into 10 groups and several grades. Table 1 Paint Coating Code Group Name Grade Name of Paint Coating Remarks TQ1 Body A B First-grade decorative and protective coating Common decorative and protective coating ? TQ2 Car body A B High-grade decorative coating First-grade decorative and protective coating Applicable to custom cars Applicable to coatings of compact cars TQ3 Wagon boxes A B Corrosion resistant decorative coating Rot resistant decorative coating Applicable to iron wagon boxes Applicable to wooded wagon boxes and iron-wooden wagon boxes TQ4 Car frame, wheel splash guard First-grade rot resistant coating TQ5 Engine Protective coating (quick drying) TQ6 Chassis TQ7 Work blank, semi-finished product of pressing, spring A B Common corrosion resistant coating Rot resistant coating TQ8 Special coating A B C D Acid resistant coating Gasoline resistant coating Heat resistant coating Soundproof, thermal isolating and wear resistant coating Applicable to storage battery tank and its bracket Applicable to inner surface of petrol tank Applicable to exhaust pi