江苏联通SGSN培训.ppt

USP4.0 SGSN Training Motorola Wei Mingming w21997@Agenda System Overview Software Structure Hardware Structure SGSN Configuration Hardware Conf Gb interface Gr interface Gn/Gp interface Ga interface Basic Signaling Flow Troubleshooting System Overview System Overview System Overview System Overview System Overview System Overview System Overview System Overview System Overview System Overview Agenda System Structure Software Structure Hardware Structure SGSN Configuration Hardware Conf Gb interface Gr interface Gn/Gp interface Ga interface Basic Signaling Flow Maintenance and troubleshooting Hardware Conf Basic Configuration： System: SET OFI? SET SIGATTR/ADD N7OPC/ADD SCCPOPC Sub-racks: ADD SUBRACK? Switch subrack Boards: The sub-board of UEEC/UAIC/USS7 could be added same time with front boards. The back board of UPIU/UEPI could be added with the front ones. Except the standby UGBI board (N+1 backup) need to be added separately, other standby boards (1+1backup) will be added together with the active one. UPIU back of UGFU need to configure the port property: SET UPIU_PORT Gb Interface Conf Gb interface protocol stack Gb Interface Conf Gb interface protocol stack Gb Interface Conf Configuration Concepts: BC: the bearer channel of FR corresponding to the timeslot group of E1/T1, the timeslot distribution must be consistent with PCU side. PVC: the BC contains some PVCs distinguished by DLCI, the DLCI value must be consistent with PCU side. NSVC: virtual link provided by NS layer for BSSGP layer, the NSVC value must be consistent with PCU side. NSE: NSE manages a group of NS-VCs, and corresponding a group of cells. BVC: BSSGP virtual connection is used in the BSSGP layer, classified to Sig BVC, PTP BVC and PTM BVC. One PTP BVC corresponds to one cell. Gb Interface Conf Gb interface Example Gb Interface Conf Gb Interface Conf Maintenance: BSSGP layer: DSP SIGBVC:; NSVC layer: %%DSP NSVC: SRN=0, SN=1;%% Sub No. Slot No. E1/T1 port BC NSVC identifier