MP1570A SONET，SDH，PDH，ATM分析仪.pptVIP

MP1570ASONET/SDH/PDH/ATM　分析仪 主要内容 MP1570A的概述 主要功能及特点 抖动和漂移测试功能（2～2.5Gb/s) 安立10G抖动测试方案（MP1580A简介） 虚拟通道设定 串联连接(TCM) APS测试 APS测定 APS测试 APS测试 APS测试 新的抖动单元的主要特点 Noise Wander (噪声漂移）测试 输出漂移 漂移产生 输入噪声漂移容限 噪声漂移传递特性 丰富的漂移应用软件 内容 有关抖动和漂移测试的要求。 10G 抖动测试方案 10G 漂移测试方案 ITU-T 有关抖动 漂移的主要标准 新 2.5G/10G 抖动单元的主要特点 2.5G/10G光 Rx(Wide)单元的主要特点 多种(6) 快速 抖动 漂移 自动测试功能 多种 漂移产生功能 功能丰富的漂移应用软件 MX150002Aワンダアプリケーションソフトを使用することにより、リアルタイムでMTIE, TDEV測定が可能です。また、TDEV Tolerance, TDEV Transfer自動測定もサポートしてます。 This shows an example of wander (MTIE: Maximum Time Interval Error) measurement results. This measurement processes the TIE data measured by the MP1580A/MP1570A, on a PC connected to the MP1580A/MP1570A running the MX150002A application software and displays the results on the PC. This shows an example of wander (TDEV: Time Deviation) measurement results. This measurement processes the TIE data measured by the MP1580A/MP1570A, on a PC connected to the MP1580A/MP1570A running the MX150002A application software and displays the results on the PC. The Output wander evaluates Noise Wander which is generated from NE connected in a network. It is evaluated by measuring MTIE and TDEV, and it confirms that nothing exceeds the specified mask line. The Noise Wander Generation measures noise wander generated from the device under test by itself. It corresponds to Jitter generation for Jitter, and it shows the amount of wander emergence when inputting Wander free signal. It is evaluated by measuring MTIE and TDEV, and it confirms that nothing exceeds the specified mask line. The Input noise wander tolerance measures tolerance of the device under test against noise wander. When inputting the standard clock added noise wander to the device under test, it confirms the followings: Not causing any alarms Not causing the clock to switch reference Not causing the clock to go into holdover It confirms that the device under test has tolerance against noise wander in accordance with specified MTIE and