本科论文--基于plc温度控制系统的设计论文.docVIP

南京工程学院 自动化学院 本科毕业设计（论文） 题目： 基于PLC温度控制系统的设计 专 业： 测控技术与仪器 班 级： 测控072 学 号： xxx 学生姓名： xxx 指导教师： xxx 教 授 xxx 副教授 起迄日期： xxx设计地点： xxx  Graduation Design (Thesis) The Design Of The Temperature Examination In PLC Temperature Control System By WANG Zhu Jie Supervised by Prof. XIA Qing Guan Associate Prof. LU Hong School of Automation Nanjing Institute of Technology June, 2011  摘 要 本文介绍温度控制系统，包括A/D转换、标度变换温度检测环节的设计。对温度检测环节做了进一步的优化设计，使该系统更实用、易行可靠在实际应用中具有一定参考价值。温度检测A/D转换 ABSTRACT The introduction of temperature-based PLC control system design, including A/D conversion, scaling transformation, temperature checking links, scoring a zero separation PID algorithms and digital triggering circuit design. Main elements : the actual temperature of the test temperature sensors, analog voltage is the value, volume via simulation A/D after his conversion and scaling practical furnace temperature. Digital signal controllers will be under constant temperature to the value and the actual temperature deviations e (k) by scoring separation PID control algorithms, with the volume of export control u (k), lead-time silicon-controlled rectifier control, regulate furnace temperature changes to the current agreement with the given constant temperature. Achieve thermostatic control purposes. Temperature of the system to do further testing and regulatory aspects of the design optimization, enabling the system more practical and easy OK and reliable, while also raising product quality and reducing the burden of manual labor. It must have practical application in reference value. Key words：temperature testing; Temperature sensors; A/D conversion; PID  目 录 前言 1 第一章 系统总体方案 2 第二章 系统硬件设计 4 2.1 PLC选择 4 2.1.1 FX2N-48MR-001PLC 4 2.1.2 FX2N-4AD特殊功能模块 5 2.2 硬件电路设计 7 2.2.1 温度值给定电路 8 2.2.2 温度检测电路 8 2.2.3 过零检测电路 10 2.2.4晶闸管电功率控制电路 10 2.2.5 脉冲输出通道 13