拉花机设计说明书（有CAD图纸）.pdf

I Firstly, the overall scheme design for garland machine, which will determine the overall layout of the machine, garland, the spindle components of the design. This paper introduces the working principle and key technology of spindle. Then, the main structure reasonable, the main components were designed, produced the assembly drawing, part drawing and design specifications and design documents. Finally, the rotation of the spindle shaft and bearing are analyzed and checked, detailed calculation shows that, the spindle is designed to meet the requirements of. A positioning and clamping the drawloom clamp, can realize the tool along the radial and axial adjustment, accurate adjustment tool can do along the axial and radial, through a simple method for different diameter of workpiece clamping and positioning, through the design of the optimization design and the reasonable design of the drawloom, achieved good results. Keywords: garland machine, spindle, spindle, bearing, pulley II 1 1 1.1 1 1.2 1 1.3 2 2 4 2.1 4 2.2 4 3 5 3.1 5 3.2 6 3.2.1 7 3.2.2 8 3.2.3 8 3.2.4 z 9 3.2.5 9 3.2.6 10 3.3 1 11 3.4 2 13 4 15 4.1 1