蓝宝石切割机设计（有CAD图纸）.pdf

) I (1) (2) (3) (4) (5) (6) II Abstract This design is the design of assembly of rod material automatic cutting device. Here mainly include: design, drive system design of the cutting blade clamping spindle parts of system design, part of the system of graduation design on the design of the basic skills training, enhancing the analysis and to solve engineering problems, and create a certain condition for general mechanical design. The structure is mainly produced by the motor power through the coupling will need to transfer the power to the screw rod, the screw rod drives the screw rod nut, thereby driving the movement, improve labor productivity and automation level of production. But also show its superiority, there are broad prospects for the development. The research of this thesis: (1) the overall structure design of automatic assembly device for cutting bar. (2) analysis of assembly device performance of rod material automatic cutting. (3) the choice of motor. (4) transmission system, execution unit and frame design of automatic assembly device for cutting bar. (5) the design of components for the design calculation and check. (6) to draw the assembly drawing and parts assembly diagram and parts diagram design. Keywords: automatic cutting assembly device, bar coupling, ball screw III