一带悬挑结构的计算分析与补强设计.pdfVIP

* 刘 铁 郑文忠 王 英 ( 150090) : 490mm 620mm , , , , , , , : ANALYSIS AND STRENGTHENING DESIGN OF A STRUCTURE WITH CANTILEVER Liu Tie Zheng Wenzhong Wang Ying ( School of Ci il Engineering Harbin Institute of Technology Harbin 150090) Abstract : In Harbin No. 6 Pharmaceutical Factory, the thickness of an external trans erse brick wall of a workshop building needs to be changed from 490mm to 620mm due to functional requirement. In order to be harmonious with the adjacent office buildingcs ornament, dry-hanging-stone curtain wall must be put up outside the external wall. The prestressed frame with cantile er should be checked and strengthened, for the additional loads caused by thickened wall and curtain wall are not considered in the original design. Calculation shows that all columns and beams ex cept cantile er beams still meet the relati e design standards in the condition of the increased loads, so only the cantile er beams need strengthening. It is proposed that the idea and method to increase resistance, reduce crack and deflection of the cantile er structure by setting up a post- constructed concrete wall between the cantile er beam of the foundation and that of 1st floor of the frame to form a deep beam with a column on one side. It can be ser ed as reference for design of similar strengthening and remodeling project. Keywords : prestressed concrete pos-t constructed RC wall RC deep beam crack de elopment deflection C40, f ptk = , 2 s