Mplayer做界面并实现基本的暂停播放功能(DOC可编).docVIP

Mplayer做界面并实现基本的暂停播放功能 实现原理 先来考虑考虑如何为mplayer编写前端界面的问题。有两种思路，一种是把mplayer解剖，直接修改他里面的代码，这样我们做得界面就能够和mplayer一体了（当然也能够通过link mplayer用到的任何的库和.o文档，把他无缝的集成在程式里面）；第二种方法就是mplayer所谓的slave模式。 mplayer /home/linux/1.mp3 -quiet -slave 现在来探讨一下slave模式：所谓的slave模式，就是mplayer在运行过程中能够接收用户的输入命令行，具体支持哪些命令行，能够通过mplayer -input cmdlist这条命令来得到，在Mplayer源码的slave.txt中也有对这些命令有详细的讲解。Slave模式下工作的Mplayer可以和系统的标准输入、输出进行信息交互。我们可以用linux C编程来完成对slave模式工作的Mplayer进行控制和信息获取。 下面是Mplayer -slave 模式的 官方文档： Mplayer/doc/tech/slave.txt (部分原文) ********************************************************************* LAVE MODE PROTOCOL The -slave option switches on slave mode, in which MPlayer works as a backend for other programs. Instead of intercepting keyboard events, MPlayer will read commands separated by a newline (\n) from stdin. To try slave mode out by hand, run mplayer -slave -quiet movie and type slave commands into the console window. Most slave mode commands are equivalent to command line options, though not necessarily under the same name. Detailed descriptions can be found in the man page. All commands can be prefixed with one of pausing , pausing_keep , or pausing_toggle . pausing tells MPlayer to pause as soon as possible after processing the command. pausing_keep tells MPlayer to do so only if it was already in paused mode. pausing_toggle tells MPlayer to do so only if it was not already in paused mode. Please note that as soon as possible can be before the command is fully executed. Available commands (mplayer -input cmdlist will print a list): alt_src_step value (ASX playlist only) When more than one source is available it selects the next/previous one. audio_delay value [abs] Set/adjust the audio delay. If [abs] is not given or is zero, adjust the delay by value seconds. If [abs] is nonzero, set the delay to value seconds. [brightness|contrast|gamma|hue|saturation] value [abs] Set/adjust video parameters. If [abs] is not given or is zero, modifies parameter by value.