微波烧结SiC_Cu_Al复合材料的工艺及机理_英文_.pdfVIP

34 12 / · 1431 · 34 12 Vol. 34 No. 12 2 0 0 6 1 2 JOURNAL OF THE CHINESE CERAMIC SOCIETY December 2006 SiC–Cu/Al 1,2 1 2 1 2 1 (1. 450002 2. 100084) (SiC–Cu/Al)X 720 3 SiC–Cu/Al 2.53 g/cm SiC–Cu/Al SiC TB333 A 0454–5648(2006)12–1431–06 PROCESS AND MECHANISM OF MICROWAVE SINTERING OF SiC–Cu/Al COMPOSITES WANG Hailong1,2 1 2 1 2 1 ZHANG Rui WANG Changan HE Xiaobo HUANG Yong HU Xing (1. Laboratory of Material Physics of the Ministry of Education of China, Zhengzhou University, Zhengzhou 450002 2.The State Key Laboratory of New Ceramics and Fine Processing, Tsinghua University, Beijing 100084, China) Abstract: Aluminum matrix composites reinforced by silicon carbide/copper coated particles (SiC–Cu/Al) were prepared using mi- crowave sintering. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques were used to characterize the sin- tered compacts. The process and mechanism of microwave sintering were discussed. It was found that the assistant-heating structure which was set up by mullite heat-preservation material, silicon carbide (SiC) rods and alumina crucible can effectively enhance the process of densification during sintering. The highest density of SiC–Cu/Al composites