EN60335-2-25嵌入式微波炉的要求--By Keng.ppt

22.05.2002 Version FINAL Deviation between build-in microwaveand portable microwave嵌入式微波炉与便携式微波炉差异比较 Prepared by: Keng Mo (莫家铿) Mar. 11, 2009 嵌入式微波炉与便携式微波炉的差异主要体现 在: 安装尺寸要求(说明书) 防触电要求 测试角的要求 通风设计的要求上. 定义： built-in appliance (嵌入式器具 ) fixed appliance intended to be installed in a cabinet, in a prepared recess in a wall or in a similar location 打算安装在厨柜内、墙中预留的壁完内或类似位置的固定式器具。 Clause 6 Classification(分类） 6.1 Electric shock protection Class I or Class II 6.2 Harmful ingress protection (IPX0) Clause 7 Marking and instructions 7.1 Marking 嵌入式与便携式微波炉的要求一样。 7.12 Instructions 嵌入式除了7.12.4要求不同外,其他与便携式微波炉的要求一样。 说明书要求： 7.12.4 The instructions for built-in appliances shall include information with regard to the following: 嵌入式器具，其使用说明(书)应包括下述方面的明确信息: – dimensions of the space to be provided for the appliance; 为器具提供的空间尺寸; – dimensions and position of the means for supporting and fixing the appliance within this space; 在此空间内支撑和固定器具的装置的尺寸和位置; 说明书要求： – minimum distances between the various parts of the appliance and the surrounding structure; 器具各部分与其周围安放器具的设施有关部分之间的最小间距; – minimum dimensions of ventilating openings and their correct arrangement; 通风孔的最小尺寸以及它们的正确布置; – connection of the appliance to the supply mains and the interconnection of any separate components; 器具与电源的连接，和各分离元件的互连; 说明书要求： – necessity to allow disconnection of the appliance from the supply after installation, unless the appliance incorporates a switch complying with 24.3. The disconnection may be achieved by having the plug accessible or by incorporating a switch in the fixed wiring in accordance with the wiring rules. 除非器具带有一个符合24.3 的一个开关，否则其需有一个在安装后用户能进行插拔的插头, 或者一个串联在固定配线上的开关来断开电源. Compliance is checked by inspection. 通过视检,检查其合格性。 安装尺寸 Clause 8 Protection against access to live part 8.1 防止接触到带电体的要求, 通过8.1.1, 8.1.2, 8.1.3的测试工具检查, 8.1.4是对安全低电压的判定. 8.1.5是对嵌入式,固定式器具的要求. 8.2 II类电器与II类结构的对基本绝缘的要求. 嵌入式与便携式微波炉的要求一样。 防触电Clause 8.1.5 8.1.5 Live parts of built-in appliances, fixed applianc