MDPE_滑石粉_EOC复合材料力学性能的研究.pdf

塑 料 2005 年 34 卷 第2 期 MDPE/ 滑石粉/ EOC 复合材料力学性能的研究 * MDPE/ / EOC 1 1 2 1 1 , , , , ( 1. 青岛科技大学高分子工程材料研究所, 山东, 青岛 266042; 2.青岛科技大学橡塑材料与工程教育部重点实验室, 山东, 青岛 266042) : 以乙 -辛 共聚物(EOC)和偶联剂改性的滑石粉( Talc) 共混改性中密度聚乙 (MDPE) 制 备复合材料,研究了Talc 的表面处理工艺、粒径和添加量,以及EOC用量对复合材料力学性能的影响。 结果表明: 硅烷偶联剂对Talc 的湿法表面处理较好,3000 目滑石粉含量为5%, EOC 加入量为2% 时, 复合材料的综合性能较好。 : 滑石粉; 中密度聚乙 ;乙 -辛 共聚物; 复合材料 :TB332 : A : 1001- 9456(2005) 02- 0050- 03 Mechanical Property of MDPE/ Talc/ EOC Composite System 1 1 2 1 1 Z OU Yuan , XIE Yan ,QIU Gu-i xue , LIU Xin-ming ,PAN Jiong-xi ( 1.Institute of Polymer M aterials and Engineering,Qingdao U niversity of Science and Technology,Qingdao, Shandong 266042, China; 2.Key Lab of Rubber Plastics Material and Engineering, Ministry of Education, Qingdao University of Science and Technology, Qingdao,Shandong 266042,China) Abstract: Coupling agent treated talc and EOC blended MDPE composite was prepared. The influ- ences of surface treatment process, size of particle and content of talcand EOC content on the proper- ties of MDPE/talc/ EOC were studied.The results indicated that the property of talc wet treatedwith silane coupling agent was obvious. When the content of 3000 mesh talcwas 5% and EOC was 2%, the composites reached better comprehensive properties. Key words: talc;medium density polyethylene;ethylene-octylene copolymer;composite materials 中密度聚乙烯( MDPE) ( 密度从 0926 ~