高强度钢板多场耦合热塑成形温度场仿真的研究.pdfVIP

高强度钢板多场耦合热塑成形温度场仿真研究 1,3,∗ 1, 2 3 2 胡 平 ；刘文权 ；盈 亮 ；史栋勇 大连理工大学工业装备结构分析国家重点实验室，大连 116024；2. 大连理工大学工程力学 系，大连 116024；3. 大连理工大学汽车工程学院，大连 116024） 摘要：高强度钢板热塑性成形不同于传统的冷成形工艺，其涉及复杂的传热学、 弹塑性力学以及微观组织相变问题。热塑性成形过程中高温工况的引入，导致板 料的力学性能和微观组织发生了显著的变化，因此，温度场的精准分析对高强度 钢板热塑性成形研究具有极其重要的意义。本文通过对不同压强下的热成形实验 数据进行统计分析，采用非线性Beck 顺序估算法获取了不同工况下板料与模具 间的换热系数，并将其集成到自主研发的动力显式有限元金属热塑成形多场耦合 仿真模块King Mesh Analysis System of Hot Forming (KMAS_HF) 。通过对U 型试 件热成形过程的数值模拟及实验校核，充分验证了本文数据处理、理论算法和仿 真模块的准确性。 关键词：热成形；温度场分析；Beck 顺序估算法；动力显式算法；多场耦合 Numerical simulation study on thermal field of high-strength steel thermoplastic stamping based on multi-field coupled HU Ping1,3,* ； LIU Wenquan1,2 ；YING Liang3 ； SHI Dongyong2 (1. State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024,China 2. Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China 3. School of Automotive Engineering, Dalian University of Technology, Dalian 116024, China) Abstract: Hot forming of ultra high strength steel is different from the traditional cold stamping, it involves multi-fields coupling problem, such as thermal transmission, elastic and inelastic mechanics and microstructure transformation. The mechanical property and microstructure of the high strength will change a lot as the forming is processed with a high temperature, so the exactly analysis of the thermal field is meaningful for the hot stamping. A set of hot forming experiments on U shape sample was taken and the temperature data was obtained. Then based on the nonlinear Beck sequential estimation, the paper got the coefficient of heat transfer under different press with diverse temperature. The dynamic explicit sheet metal for