折流式超重力旋转床转子结构对气相压降的影响.pdf

22 1 No.1 Vol.22 2008 2 Journal of Chemical Engineering of Chinese Universities Feb. 2008 1003-9015(2008)01-0028-06 , , , ( , 310014) - 90 mm TQ021.1 TQ053.5 A Influence of the Rotor Structure of Rotating Zigzag Bed on Gas Pressure Drop SUI Li-tang, XU Zhi-chao, YU Yun-liang, JI Jian-bing (College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014, China) Abstract: Following the appearance of RPB (Rotating Packed Bed), the Rotating Zigzag Bed (RZB) appears as a novel kind of highly efficient mass transfer equipment which can greatly intensify the gas-liquid mass transfer process in it. The relationship between gas pressure drop flowing through the equipment and the rotor structure of RZB under different operation conditions in the cold mode with air-water system was measured and analyzed, and the model of dry bed gas pressure drop in the RZB was established. The results indicate that the rotor structure of RZB has great influence on the gas pressure drop, and there is an optimal vertical distance between the immobile disc and the rotating disc with the definite baffle structure. For the experiments used RZB, the optimal distance we found is 90 mm, and the reasonableness of the equal flow-through area principle we adopted in the design of the experiments used RZB was proved through the experimental results. Using the dry gas pressure drop model proposed, the calculated results agree well with the experimental results, and the model proposed lays the foundation for the establishment of the irrigated gas pressure drop model. Key words: Higee; rotating zigzag bed;