XCP -Part 5- Example Communication Sequences -1.0.pdf

XCP Version 1.0 “The Universal Measurement and Calibration Protocol Family” Part 5 Example Communication Sequences Association for Standardization of Automation and Measuring Systems Dated:2003-04-08 © ASAM e.V. Status of Document Date: 2003-04-08 Authors: Roel Schuermans, Vector Informatik GmbH Rainer Zaiser, Vector Informatik GmbH Frank Hepperle, DaimlerChrysler AG Hans Schröter, DaimlerChrysler AG Reiner Motz, Robert Bosch GmbH Andreas Aberfeld, Robert Bosch GmbH Hans-Georg Kunz, Siemens VDO Automotive AG Thomas Tyl, Siemens VDO Automotive AG Robert Leinfellner, dSPACE GmbH Hendirk Amsbeck, dSPACE GmbH Harald Styrsky, Compact Dynamics GmbH Boris Ruoff, ETAS GmbH Lars Wahlmann, Accurate Technologies Inc. Version: 1.0 Doc-ID: XCP -Part 5- Example Communication Sequences -1.0 Status: Released Type Final Disclaimer of Warranty Although this document was created with the utmost care it cannot be guaranteed that it is completely free of errors or inconsistencies. ASAM e.V. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any expressed or implied warranties of merchantability or fitness for any particular purpose. Neither ASAM nor the author(s) therefore accept any liability for damages or other