AP公司简介 CN rev7- 2010 12 08.ppt

* * * The system also increase the reliability of any ups installation by replacing or supplementing the DC power source. The system is quite simple to install and operate. Once installed, the user will have very little interaction with the system unless desired. The system can accommodate any UPS that floats from 400 to 600 VDC. This allow any UPS system to be used in NA as well as systems around the world. Once a power event has occurred, the system can be programmed to discharge at any voltage between 360 and 550 VDC. A large benefit with the CS2 is that it is a second generation product. We have learned from the first product released in 1997. Lessons learned and and improvements have been incorporated into the product. It has many options that allows for all situations and communication requirements. * * * * * * * * We manufacture uninterruptible power (UPS) systems that utilize green technology as a renewable energy source. We sell turnkey critical power solutions that provide “power insurance” to global enterprises with zero tolerance for downtime. This is significant in that we manufacture our systems here in the U.S., quality from offshore manufacturing is does not come into play as a question. We sell full turnkey solutions, this means we are addressing not only the UPS, but all of the power components as well as consultation, design, implementation and service. * * We have branded our systems ‘Intelligently Efficient’. UPS systems operate based upon customer loading level, which is represented across the bottom of the graph. 该图表和文字的关系不大，看不大懂，好像是关于效率的，而文字则是说成本的。 Energy efficiency, is represented on the vertical graph. Active Power’s UPS systems, represented in the red, operates at a much higher efficiency level than conventional double conversion ups systems with batteries, this you see represented with the the black lines. Our systems, depending on load, can perform at up to 98% energy efficiency level, with only 2% losses. A conventional sys