ECCC112THSSEN厂不锈钢的技术发展水平.pdfVIP

New and updated plants – combi, bloom and billet casters Session 13 1 The “state of the art” slab caster for stainless steel in ThyssenKrupp Acciai Speciali Terni (TKAST), Italy Authors Gabriele Paulon, Danieli C Officine Meccaniche S.p.A. Via Nazionale 41 – 33042 Buttrio (UD) – Italy Carlo Piemonte, Danieli C Officine Meccaniche S.p.A. Via Nazionale 41 – 33042 Buttrio (UD) – Italy Du Shenyong, Danieli C Officine Meccaniche S.p.A. Via Nazionale 41 – 33042 Buttrio (UD) – Italy Contacts Gabriele Paulon, Danieli C Officine Meccaniche S.p.A. Direct Tel: +39 0432 1957522 Direct Fax: +39 0432 1951804 Email: g.paulon@danieli.it Abstract thin slabs in hot charge mode, by-passing the walking On April 23, 2009, a new single strand slab caster at beam furnaces and the rougher mill as an alternative to ThyssenKrupp Acciai Speciali terni (TKAST) was the original conventional route through caster-reheat successfully started up with the first cast of AISI 304 furnace-roughing mill. grade in Terni plant, central Italy. TKAST is the Italian In 2007, TKAST decided to replace the CSP caster company of ThyssenKrupp Stainless group. with a state-of-the-art conventional caster for 215 mm The new caster is designed for a total capacity of thick, 800-1,600 mm wide slabs. Only the existing ladle approx. 900.000 tpy of stainless steel slabs covering turret, casting floor equipment and steel structure could the complete range of stainless grades, including AISI be reused. All the rest had to be rebuilt. The original 300 and 400 families (austenitic, ferritic and mar