应用PROE设计修正带上盖注射模具纲.pdfVIP

PRO/E Pro/ENGINEEREMX4.1 , ; ;Pro/e;EMX4.1 Injection Mold Design of Amendment to Bring Cap on Pro/e Abstract Through the amendment put on the market cover the existing plastic parts design analysis, design of the plastic parts. In the mold design process, involving the structural design of plastic parts, injection molding machine of choice and some important parameters of the calibration, the cavity to determine the number and distribution patterns, and described in detail in the casting mold design and system design, molding parts and components design and cooling system. In the mold design process, using Pro / ENGINEER, EMX4.1 and other design analysis software, the software used to design analysis and optimization of design parameters and reduce design time and improve design efficiency. Through the entire mold design, I had been able to skillfully use the current popular design analysis software, learning experiences based on the calculated or select some parameters to increase the understanding of plastic injection molds. Key words Amendments to bring cover;Mold design;A two-cavity mold;Pro/e;EMX4.1 1 1 1.1 1 1.1.1 1 1.1.2 3 1.2 3 1.2.1 3 1.2.2 4 1.2.3 4